Previous Article

How to Engrave a Headstone

Next Article

How to Engrave on Cemetery Head Stones

How to Engrave Monuments

Monuments are constructed of several different materials. For these varying materials you will find several methods in which you could use to engrave lettering and even photographs onto these monuments. In order to save a considerable amount of money you should consider performing these engravings yourself. 


  • Use an electric engraver when engraving precision lettering and designs on these monuments. If you wish to add script letter and/or lettering with decorative touches these engravers will allow you to engrave as if you are writing onto the stone monument. 

  • Use a stencil knife if you have found a stenciled design in which you wish to add to this monument. The way in which you engrave with a stencil knife is similar to using a chisel but not as evasive. Once you have chips out the shapes, lettering and other designed with this stencil knife you would use a sandblaster to smooth out the etchings. This will also remove any debris left during the etching process. Repeat the engraving process if you did not fully chip out all portions of the stenciled design. 

  • Use a laser etcher if you want to add photos or other printable designs on these monuments. Basically you would place a film copy of the photo or design onto the monument and then use the laser etching to engrave the photo or design into the stone. This technique follows a basic process in the same manner that tattoos are cut into skin. However in this case you are using a laser whereas a tattoo artist uses a high power needle.