How to Extend a Roof
Extending a roof involves attaching the extensions to the rafters and putting in the other parts of the roof such as fascia, shingles and trim. Many homeowners extend a roof for many reasons. The extension could be to add shading to a home, which can really help with the utility bill. Others extend the roof to divert water, regardless of the reason it is important to know the proper process.
- Check with your city government office for building codes and regulations for extending a roof. You will need this before you can start building. Try to limit the roof extension to two feet. Wide extensions require engineering to make sure there is adequate support.
- Remove the fascia from the rafter tails. If there is any trim, remove that also. You should be able to see inside the attic once the rafter tails and wall plates are exposed.
- Look between the wall plate and roof sheathing. Decide what the dimensions are of the largest piece of wood that can fit between the roof sheathing and wall plate. It does not have to be exact but if you want, you can use a tape measure. This size is the stock size you will need for the rafter extensions.
- Decide how many feet you want to extend the roof. Cut the rafter extensions three times that distance.
- Nail the rafter extensions to each rafter on the roof. Place nails every six inches. Using a framing nailer will make nailing easier than using a hammer.
- With the rafters installed, you can now install the fascia to the rafter tails. Nail them to the rafters using the framing nail. You can install the pieces you took off before unless they are damaged.
- Put in roof sheathing. Match the thickness of the existing material within 1/8 inch of new sheathing. Use a hammer or nail gun to drive the nails through the sheathing.
- Put on the shingles. Use galvanized nails and a hammer to install the shingles to the roof. You will also need shingles to cover the extended part of the roof.