Previous Article

How to Use Roofing Felt as a Weed Barrier

Next Article

How to Order for Roofing Supplies

How to Figure Roofing Supplies

Roofing materials are always sold by the square foot. Which is why it is essential to know how to calculate the surface area of a roof. A simple roof with rectangles on the sides of a ridge line isn’t hard to calculate. Roofs with dormers or hip ends can be harder.


  1. Get a sturdy ladder and climb up on the roof. If you don’t have detailed plans of the home, this is something that must be done to measure the roof surface. This task will need two people and a 25 foot or longer tape measure, depending on the size of the home.

  2. Measure the width and length of every roof segment. Be sure to measure from the edge of the eaves over to the ridgeline. Then you measure from the left edge of the roof over to the right edge. Round the measurements to the next full root. Roof segments can come in triangles as well. In this case, measure the two sides connected by a right angle.

  3. Calculate the square footage of every segment. When it comes to rectangles or squares, multiply the length by the width. If it is a triangle, multiply the length by the width and divide by two. Then add the square footage of the roof segments for the total square footage of roofing required. Divide the number of square feet by 100 for the number of squares necessary. At this point, add a waste factor of one to five percent based on the complexity of the roof.