Previous Article

How to Figure Roofing Supplies

Next Article

Roofing Supplies Checklist

How to Order for Roofing Supplies

Whether in the roofing business or doing it yourself, to install a roof you’ll need to know how to order the roofing supplies. There are some ordering techniques that can save you a lot of money on your roofing supplies. It takes a good amount of time and effort, but the payoff is pretty rewarding.

Items Needed:



  • Tape Measure

  • Pencil or pen

  • Money

  • Paper

  • Ladder

  • Roofing cement

  • 3 pounds of nails

  • Shingles

  • Roofing felt



  1. Know that before you begin ordering your roofing supplies, you’ll need to figure out how much to order. Have someone help you measure the dimensions of your roof and record your measurements on a piece of paper. You’ll need the width and height of each section on your roof. Any part of your roof where shingles are going to be placed will need to be measured.

  2. Determine the total area of the roof in square feet. Multiply each section’s width by its length. Add each section together to get the total number of square feet and divide the total by 100. This will tell you how many shingle bundles, or squares, to order. It is always important to order a little extra in case any shingles are damaged during installation.

  3. Order the materials needed to install your shingles. You’ll need about 3 pounds of nails. See what type of nails are recommended by the shingle manufacturer for the type of shingles you plan to install.

  4. Purchase the proper amount of square feet of roofing felt for new roof installation. The felt should already be installed if you’re just replacing old shingles. Installing roofing felt will require the purchase of staples to tack it on.

  5. Buy plenty of roofing cement to secure the shingles on the edges or ridges of your roof.