Previous Article

How to Connect Three Auto Audio Speakers

Next Article

Auto Accessories

How to Fit Seat Covers

Fitting seat covers is a wonderful alternative to having older car seats reupholstered.  While there are seat covers that are designed to fit the general style of different types of car seats, a little tweaking will make the cover a little more form fitting, which helps to minimize the need to adjust the cover from time to time.


  1. Identify the type of seat cover involved.  Since car seats vary in design and size, make sure to purchase seat covers that are as close to the design as possible.  This will help to reduce the amount of modification necessary to obtain a snug fit.

  2. Prepare the seats for covering.  With many seats, this means temporarily removing the headrest.  Slide the headrest out of the opening in the top of the seat and remove the cover that surrounds that opening, using a screwdriver to detach the two screws holding the cover in position. In addition, move the seat into a position that makes it easy to access the back, front and the sides of the seat, as this will make it easier to slide the cover onto the seat.

  3. Slide the seat cover into position.  This involves fitting the open end of the seat cover over the top of the seat, and then gradually moving the cover downward until the entire seat is covered.  Take the time to slide the cover down part of the way, and then make sure it is not bunched or caught on any of the sides before proceeding.  This will help minimize damage to the cover during this phase of the process.

  4. Secure the bottom of the cover.  Some designs are equipped with drawstrings that can be tightened and then tied once the cover is in position.  Others may include snaps that make it possible to secure the cover to the existing upholstery.  Consult the instructions that come with the cover to identify the best approach.

  5. Tuck and fold the cover for a better fit.  Use the hands to tuck the seat cover material into any folds between the back and the seat proper. 

  6. Reattach the headrest.  Use the knife to cut a small opening where the headrest will be reinserted, then place the cover into position, and secure the cover with the screws.  Slide the headrest back into the opening until there is a click, letting you know the device is now reattached properly.