Previous Article

How to Fix Casement Window Cranks

Next Article

How to Glaze a Casement Window

How to Frame a Casement Window

There are two ways in which you can go about replacing old windows with new casement windows.  First, you can simply remove the old one and replace it with a new one.  Secondly, you can replace the old frame too.

Things That You Will Need



  • A pair of safety glasses

  • A utility knife

  • A putty knife

  • A tape measure

  • A staple gun

  • A hammer

  • Self-adhering sill flashing

  • Caulk

  • A full-width drip cap

  • Flashing

  • A foam backer rod

  • House wrap tape

  • Some waterproof shims

  • Some fasteners

  • Some extension jambs



  1. Remove any old insulation and rotted wood from the framing.

  2. Replace any wood or insulation that you removed.

  3. Put weather protection in place.

  4. Measure from the upper left corner to the lower right corner to ensure that it is plumb.  Repeat from the upper right corner to the lower left corner.  These two diagonals need to be within 1/8 inch of each other.

  5. Slice the house wrap in the middle, fold it in and staple it.

  6. Create a flap of house wrap at the top that is the width of the flashing.

  7. Staple this flashing into place at the top.

  8. Put flashing on the lower sill.

  9. Staple the flashing’s corners down.

  10. Slide the window into place.

  11. Use wood shims at the sides, bottom and top to ensure you have the window properly centered.

  12. Tack down the corners.

  13. Overlap the top and bottom flanges then use sealant on them.

  14. Center and shim the sides, top and bottom of the center window after you are sure it is plumb.

  15. Fasten the window down every 6 to 8 inches.

  16. Put flashing at the sides making sure to overlap it. 

  17. Put 1/4-inch-wide sealant at the top of the window before folding down the house wrap and taping it into place.

  18. Cut off the shims so that they're flush and don't stick out.

  19. Insert a backer rod all the way around your window frame.

  20. Put a sealant all the way around the window.