How to Identify a Battery Pack Connector
Although battery packs are available in various colors and different types of shapes, all have common characteristics that make them easy to identify. These are the parts on certain devices that connect the power source to the device so that the actual device is able to be powered.
- Locate the unit or device from which you wish to identify the battery pack connector. The connector can usually be found in the same location no matter what type of device you are working with.
- Open the back panel to the battery pack. This is a simple step that may require the use of a small screwdriver, depending on the device in question, or may simple need to be snapped out of place.
- Look behind the door, or panel, and into the area where the battery (or batteries) are being housed. This is the general area where battery packs are found.
- Take hold of the wires that are there and place them in a straight position so that they uncover the battery connector. It is extremely vital that you do not pull these wires out of where they are connected; doing so will damage the device or unit and may cause it to not work anymore.
- Locate the plug at the end of the wires. These rectangular or round-shaped plugs have small holes in them and are the battery pack connectors. These connectors may only have one hole if it is in the shape of a round cylinder, but may have multiple small holes if it is a square shape.