How to Install Bathtub Grab Bars
You can make your bathtub safer and more versatile by adding grab bars. The bars can provide the extra security needed to ensure you do not slip and fall while getting in or out of the bathtub. Installing the bathtub grab bars does not require using the services of professional because it is something that you can do yourself.
How to Install Bathtub Grab Bars
- Use an electronic stud finder and locate the studs in the wall where you want to mount the grab bars and mark the location. Once you have located the first stud, measure 16" over to find the next stud and mark that spot.
- Determine where you want the bars located.
- Place the grab bars over the stud locations you have marked and place new marks where the screws for the bars to be located.
- Use a drill to make holes in the wall in the spots you have marked for the screw placement. Use a drill bit that is made especially for tile. It should be done by slowly drilling the hole while gently applying pressure so you do not damage the tile.
- Put some silicon caulk on the screws before installing them. This will help to keep the water and moisture from entering the wall. It is also recommended that you use stainless steel screws to prevent them from rusting.
- Mount the grab bars on the wall and secure it with the screws. Do not tighten the screws to tight because the tiles may crack under the pressure.