How to Install Brackets for Home Shelves
Shelves are a great way to display items and add a decorative touch to a room. Some shelves can be installed directly into the wall using nails or screws. These shelves can fall and tip easily, causing damage to your items and injury to your family or guests. Brackets are a great way to hold shelves safely in place.
Items needed:
- Shelf brackets
- Tape measure
- Screws
- Drywall hangers
- Level
- Pencil
- Drill
Step 1: Use a tape measure to measure the brackets. Hold the brackets up against the wall and place the level on top of it. Adjust the brackets until they are level. Use a pencil to make a mark on the wall where you want the shelves to be placed. It is best to mark through each screw hole in the brackets. This will show you exactly where you should place the drywall anchors and screws when you are ready to install the brackets.
Step 2: Use a drill to screw the drywall anchors into the wall. Make sure the drywall anchors are strong enough to hold the shelves and anything you plan to place on them. Look on the package to see the maximum weight the drywall anchors can hold. Drywall anchors can be purchased from most hardware stores.
Step 3: Hold the shelf brackets in place and use the drill to screw the screws through the brackets and into the drywall anchors. Lay the level on the brackets to make sure they are still level.
Step 4: Slide the shelves into the brackets. Most shelves will slide straight into the brackets and up against the wall. Some shelves will set on top of the brackets. Because the shelves that set on top of the brackets are not attached to anything, they can tip over and fall off easily. Shelves like this should not be used to hold or display large items.