How to Install Door and Window Trim
Door and window trim is msotly used to cover the insulation and gaps around the door and window frames. It can also be used to create an accent piece or personality for your home. Trim can be installed fairly quickly and easily, with just a few simple tools.
What you will need:
- Tape measure
- Wood glue
- Miter saw or miter box and handsaw
- Pneumatic nailer or hammer
- Finishing nails
- Caulk
- Nail set (if you are using a hammer)
- Molding/trim of your choice
- Plane box
- Wood putty
- Sand paper
- Paint or stain
- Measure the top and sides of the door or window. Measurements should be from the inside corners of the frame.
- Use the miter saw or miter box and handsaw to cut the trim to your measurements. The trim should be cut at a 45-degree angle with the shorter side on the bottom and the longer side on top. For sidepieces, the shorter side will be inside and the longer side will be outside.
- Use the plane box to shave down the backs of the trim where you made the cuts. This will allow the front edges of the trim to fit tightly together.
- Glue the trim to the top and sides of the door or window using the wood glue.
- Nail the trim to hold it securely. If you are using a hammer, you will need to use the nail set to sink the nail heads into the trim.
- Fill in the nail holes with wood putty.
- Sand the putty once it has dried to create a smooth finish.
- Caulk any small gaps that may be visible between the trim and the surrounding wall.
- Paint or stain the trim with the color of your choosing.