How to Install Double-Hung Window Replacements
There are various options available to you if you are considering replacing your windows. One of the more popular choices is double-hung windows. This option is more energy efficient than many of its counterparts, is easy to clean and can be installed in a quick and simple process.
What You'll Need:
- Measuring tape
- 8-inch wide moisture strips
- Utility knife
- Stapler
- Carpenter's level
- Electric drill
- Wooden shims
- Hammer
- Nails
- Caulk
- Caulking gun
- Use measuring tape to measure the window space to ensure that the new double-hung window will properly fit.
- Place 8-inch wide strips of moisture seal all around the inside of the window frame. Push the strips behind the existing siding. Cut several diagonal slits in the corners of the strips using a utility knife. This will allow you to easily fold the seal over the frame. Staple the strips into place.
- Place a carpenter's level over the sill to ensure that it is level. If not, insert thin shims on the frame and check again to see of the surface is level.
- Using a electric drill, drill plot holes on the frame and through the shims, then hammer in the shims.
- Install a line of caulking material onto the jamb using a caulking gun.
- Raise the window into the frame. Hold the window in place and hammer a nail about halfway into the upper corner of the window trim, continue to nail in the entire window. You may need to ask for assistance when completing this step.
- Open and close each of the sashes of the pre-hung window to ensure that they are working properly. If not, consider adjusting the window until it's squared.
- Insert nails into the window jamb. Ensure that the nails are places between 8- and 10-inches apart.
- Caulk all of the joints where the window connects with the siding.