Previous Article

How to Buy Diesel Exhaust Systems

Next Article

All About Muffler Repair

How to Install Muffler Hangers on Your Car

Muffler hangers are small, inexpensive, round pieces of rubber that attach around the muffler and exhaust mounts to hold the muffler in place. When they are strained, they can break, releasing the muffler and letting it hang below the car. Muffler hangers are easy to replace.

Items Needed:



  • Crescent wrench



  1. Slide underneath the vehicle and inspect the muffler area. A broken exhaust hanger will look like a small round piece of rubber. If the hanger is broken, you will notice the muffler hanging lower than it should.

  2. Remove the old, broken exhaust hanger. Most exhaust systems require two hangers to hold the muffler in place. If one breaks, it can strain the other, causing it to break as well. Check the other hanger, and remove it if broken.

  3. Place the new muffler hanger on the top exhaust mount and allow it to hang.

  4. Use one hand to hold the exhaust in place, and use the other hand to pull the muffler hanger around it. If you cannot do this by yourself, ask a friend to hold the exhaust for you while you attach it to the hanger. You can also use a crescent wrench. Slide the handle of the wrench into the middle of the hanger, and then use the wrench to attach the exhaust to the hanger.

  5. Slide the muffler hanger over the exhaust mount to hold the muffler and exhaust system in place. Repeat this process to install the second muffler hanger on the opposite side of the first.