How to Install New Gutter Guards

In order for the gutters on a house to function properly, they must be free of leaves and debris. Gutter guards acts as a filter for gutters. They allow water to drain into the gutters but prevent leaves, sticks and other debris from blocking the gutters.  Gutter guards will make your gutters last longer and make cleaning them easier.

Step 1: Clean out the gutters. Be sure to remove any debris from the downspouts.

Step 2: Check your gutters for leaks. Put a water hose into the gutter and turn on the water. Look for any areas of the gutters that are leaking water. If the gutters are leaking, they will need to replaced before you can install new gutter guards.

Step 3: Remove the old gutter guards. Pull the top of the gutter guard out from under the bottom row of shingles. The gutter guard will snap free from the gutter.

Step 4: Use a tape measure to measure the gutters that need new guards.

Step 5: Purchase the gutter guards with the measurements taken in Step 4. These can be found in most home improvement stores like Menards or Lowe's.

Step 6: Measure and cut the gutter guards to fit each section of gutter.

Step 7: Slide the top part of the gutter guard under the last row of shingles. The edge of the guard will snap to the outside of the gutter.

Step 8: Check the gutters and guards often to make sure the guards are keeping the leaves and debris out of the gutters.