How to Install Roof Trusses
Roof trusses are compared to your roof as the roof skeleton. Various looks and sizes are available. They are custom built before being delivered to the work site. Once they are delivered, you will want to know how to install them. Usually this is a job that you can do yourself, with some assistance, once you know the proper method.
- Measure and mark the placement of the trusses on the exterior walls according to either your building’s design or your manufacturer’s recommendations. The spacing of each truss will depend upon its length. You can get more information on this from the SBCA (Structural Building Components Association).
- Set good bracing. Your first truss has to be braced to the ground to ensure that it is stable. This can either be done within the structure itself or on the ground outside. Interior bracing is recommended by the SBCA just in case the ground around the outside of the building isn’t level.
- Hoist each of the trusses into position. The easiest way in which to do this is with a crane. However, if you have two helpers you can stand on scaffolding and hoist the trusses up to 30 feet.
- Brace the trusses as it is hoisted into position. You will want to add both lateral and diagonal bracing to keep it from toppling.
- Use a carpenter’s level to make sure that the truss is plumb.
- Use long screws or nails to secure it into place permanently. These need to be long enough to penetrate through your truss and into the wall.
- Once you have your first truss in place you will want to do the same for your second truss. Make sure that each truss is secured before adding any subsequent trusses along the points that you have measured and marked.