How to Install Stock Cabinets
Paying a person to install stock cabinets is a pricey project, but it may not be necessary to contract this work out. Save money by performing the installation yourself; you do not need to be highly skilled in order to install the cabinets.
Items Needed
- Writing Utensil
- Wood Screws
- Drill
- Level
- Tape Measure
- Electronic Stud Finder
- Wood or Plastic Shims
- Take the stud finder and find the studs inside of the wall. With the writing utensil, mark where the studs are in the wall.
- Using the tape measure, measure the cabinet’s height and mark the height on the wall using a level and writing utensil.
- Find the backing plates, which are on the back of the cabinets usually along the top and bottom of the cabinets. Using a tape measure, measure the backing plates and write it down.
- Open the inside of the cabinets you are installing and, with a writing utensil, mark where the wall studs will be.
- Hold up the cabinets to the wall and, using a drill, put the cabinets into place where you marked on the cabinets inside. Securing and having the cabinets level is important. Use a level to check if the cabinets are in alignment. If not, use the drill and unsecure them slightly and readjust until level.
Tips
- Be sure to have at least one other person help you install the cabinets; one person to do the drilling and one person to hold the cabinet in place.