Previous Article

How to Install a Flat Roof

Next Article

How to Install a Garage Door

How to Install a Flexible Exhaust Pipe

A flexible exhaust pipe is used to connect the engine to the exhaust. Flexible pipes are designed to absorb the vibration allowing the pipe to protect the more fragile parts of the engine. Installation is easy and will allow your exhaust system to have a breaking point in case of damage; this pipe essentially protects the rest of your exhaust system from harm.


  1. Raise your car onto an auto lift or slide underneath the car allowing access to the exhaust system.

  2. Locate the cars muffler and exhaust downpipe; your flex pipe will be installed between the muffle and downpipe using a pipe elbow to attach it.

  3. Loosen and remove the bolts that are currently attaching the pipe elbow to the muffler. 

  4. Loosen the clamp that holds the flex pipe to the exhaust pipe.

  5. Remove the gaskets that are inside of the flanges, and then clean them with a wire brush.

  6. Remove any dents in your exhaust downpipe, making sure that the pipe is as rounded as possible; this will ensure the best seal when installing the new flex pipe.

  7. Loosen the bolts that hold the muffler and in place. Doing this will allow some flexibility during your installation of the new flex pipe.

  8. Apply exhaust sealant to the muffler gasket and the end of the exhaust pipe. Sealant will provide lubrication to make your installation smoother.

  9. Slip your new flex pipe over the end of the exhaust pipe and then into the gasket.

  10. Position the new flex pipe and muffler to ensure that it is straight; you do not want it to be twisted at all.

  11. Clamp your flexible exhaust pipe over the end of the exhaust downpipe. Use a screwdriver to tighten the clamp into place.

  12. Locate the holes that are between the flex pipe and the muffler flange.

  13. Insert bolts through the holes, and then tighten bolts with a wrench.

  14. Inspect the finished job; ensure that all bolts and mountings are tightened and in place. If there are any plastic ties attached to your new flex pipe from shipping, remove them.