How to Install a Flat Roof
Installing a roof can be done by a professional or as a DIY project. If you want to hire a professional to install a flat roof, search the communities of MerchantCircle to find a reputable roof installation company in your area. If you want to install a flat roof on your own, here are the steps to follow.
Sweep off the area you want to cover with a flat roof. Any dirt, rock or debris will cause bumps in your new roof.
Attach the underlay. Make sure the underlay is as smooth as possible. You will also need to make sure it hangs over the edge into the gutters of the building.
Make sure that your roofing materials are flat. Many people purchase rolls of roofing material. If you leave it rolled, it can buckle or crack over time. Cut the roll into several 12 foot sections. Stack the sections and allow them to flatten overnight.
Cut a starter strip. This strip should be about 15 inches wide. Use roofing cement to attach the strip to the underlay. Make sure the strip is level and flat. Nail two rows of nails every six inches.
Cut another strip. Place this strip over the starter strip, leaving approximately 8 inches of the starter strip showing. Place roofing cement under the strip and then nail two rows of nails every six inches.
Continue adding strips of roofing material with roofing cement and nails until the roof is completely covered.
Add roofing cement to edges and corners to ensure they are properly secured.
Use a roof sealant to cover the entire roof. Allow the sealant to dry. You now have a new flat roof that you can be proud to display in your neighborhood.