How to Lift a Suzuki Carry
The Suzuki Carry is a vehicle used usually in a warehouse setting to move objects of heavier size from one end of the room to the other. Lifting the Suzuki Carry is a very easy task to complete, but you need to make sure you are careful and not damage the frame.
Things you will need:
- Car jack
- 4 jack stands
- Get your car jack and place the lift plate underneath the metal edge behind the front right wheel of the frame.
- Raise the jack so that the Suzuki Carry is rising from the ground on the right side. Once it has risen off the ground completely you will need to place one jack stand under each metal edge by the front and rear wheel.
- Lower the jack until the metal frame is on both of the jack stand. Remove the jack from the right side of the Carry.
- Place the jack on the left side of the Suzuki behind the right wheel where there is a metal edge from the frame.
- Raise the jack until the left side of the Suzuki is lifted far enough off the ground to place the jack stands under.
- Get the jack stands and place one behind the front wheel of the Suzuki and in front of the rear wheel.
- Lower the jack until the metal frame is on both of the jack stands.
- Check around the vehicle and make sure all the stands are holding the Carry correctly.
- Remove the jack from under the Suzuki.