How to Lubricate a Garage Door
A garage door should be properly maintained to keep it in good working order. You will take a chance of having to replace the door if the proper maintenance is neglected. Adding a lubricant to the garage door hinges, rollers and pulley is necessary to keep it operating smoothly and this is something you can easily do.
How to Lubricate a Garage Door
- Apply penetrating oil on the bearings on each of the garage door rollers. This should be done by placing the tip of the oil container close to the base of the stem and the roller, which is where the bearings are located. Use your finger to rotate the roller wheel while applying the oil.
- Rotate the sleeve on the outer hinge so the seam is facing you. The sleeve is the part of the hinge that holds the roller. Apply a couple of drops of oil into the seam of each sleeve. Rotate the stem with your fingers to evenly distribute the oil.
- Apply a silicone lubricating oil spray to the front torsion springs of the door. Open and close the door several times to distribute the oil throughout the springs.
- Apply two drops of penetrating oil into the pulley bearings, which are located at the front of the springs.
- Apply a light coat of silicone lubricating oil spray to the curves of both vertical tracks of the door. This is the only place that oil should be applied on the track.