Previous Article

Rules of Advertising and Marketing

Next Article

How to Recycle Advertising Banners

How to Make Advertising Banners

Creating advertising banners is one of the top ways to promote your business. By creating banners at home the business owner will be able to save thousands of dollars. Banners open up a new source of revenue since it allows consumers to become aware of a business or event that they would not normally know about.

Supplies Needed



  • Scissors

  • Hole puncher

  • Ribbon (optional)

  • Cardstock

  • Foam or cardboard letters

  • Wooden dowels or PVC piping

  • Stapler

  • Plastic sheet, vinyl, or cardboard

  • Permanent markers

  • Yardstick


 


How to Make Advertising Banners



  1. Create a simple sketch of how you want the banner to look. Also note the size needed for the banners, as well as the size of the lettering and any designs. Include the company or organization name and slogan.

  2. In pencil or tape, outline the border and where the slogan will be placed. You may create a border by using print design, or construction paper. Use the meter stick to make sure that the lettering is not crooked.

  3. After outlining the size of the banner you may begin proceed to cut it out. The size should be around 6 1/2 feet; however, this can vary. The letters should be at least 8 inches in height, and at least 3 inches wide. When cutting out the banner it is important to take into consideration how tall and wide the logo and slogan are going to be. The slogan should be considerably smaller than the logo to not distract from the business or event name.

  4. Use a stapler or sewing needles to create a sleeve on the left and right side of the banner.

  5. Use a sharpie, marker, or a similar object to outline the lettering. By outlining the lettering the slogan or logo will stand out more to consumers. You may use stencils to create the lettering, construction paper, or cardboard. Latex paint works best as the letters do not crack, and is easy to apply. Allow the lettering to dry several hours. Use a yardstick whenever adding lettering or designs.

  6. Use the PVC pipes or dowels to place in the two sleeves. Secure the piping with tape, to adhere it to the sleeve.