How to Make Cheap Solar Cells
There are different ways to make a solar panel on a budget. You can purchase broken solar panels from eBay or you can use oxidized metals and create a solar cell. Understanding how solar energy is harvested is an important skill to master in the 21st century.
Materials:
- Copper flashing
- Metal cutters
- Glass jar
- Salt
- Digital multimeter with clip
- Electric burner
Procedure:
- Cut copper flashing metal in half.
- Put one half in the electric burner turned all the way up.
- Allow the metal to cook for about one half hour. Cuperic oxide will change color with heat, eventually turning black.
- Remove from heat. Allow metal to cool.
- Fleck off the black oxide being careful to not remove the reddish colored cupric oxide under the black cupric oxide crust. The black crust will cool more slowly than the metal, making it easy to remove. Scrub the flakes that are clinging to the metal using soap and water without damaging the coating underneith.
- Line the jar with both sheets of copper. Allow the treated copper to face the inside of the jar.
- Fill the jar with water one inch below the top of the copper sheets. Do not get the top of the metal wet.
- Add two teaspoons of salt.
- Place jar into constant full sun; a south facing, unobstructed location is best.
- Connect the positive lead to the untreated copper plate.
- Connect the negative to the treated copper plate.
- The voltage meter should read a slight current from the energy generated from the sun.