How to Make a BBQ Grill Cover

BBQ grills can become damaged if they remain exposed to the elements for long periods of time. A barbecue grill cover protects the grill and helps it to last longer. Plastic covers are available in stores but these are often not very durable. A sewn cover custom made to the grills shape and size can last much longer and will do a better job of protecting the grill.

Supplies:

• Canvas Fabric


• Measuring Tape


• Scissors


• Paper and Pins


• Waterproofing Spray


• Sewing Machine

Procedure:

• Take measurements of the grill using the tape measure. Measure the width, depth and height.


• Sketch the pattern for the cover on a piece of paper using the measurements above. Add two inches to all the measurements to allow for the seam.


• Cut the pattern pieces from the paper and place them on the grill to ensure the measurements are accurate. Make adjustments to the pattern if necessary.


• Place the pattern on the canvas fabric and cut the pattern out. Use sharp scissors on the fabric and use pins to mark the right side.


• Pin the side pieces together with the centre piece and with the sewing machine; sew a half inch seam all round creating a box shaped cover.


• Fit the cover over the grill to ensure the size is right. Make any adjustments if necessary by adjusting the seams.


• Remove the cover from the grill, turn the fabric inside out, fold and pin all round the edges. Sew the hem along the bottom edge using a straight stitch.


• Fit the cover back onto the grill and apply a waterproofing spray onto the fabric. After it has completely dried, turn the cover inside out and spray the interior of the fabric. Leave it to dry as well. The spray should only be used outdoors.