How to Make a Bitless Bridle
A traditional bridle has a bit, which is a steel piece that fits in the horse's mouth. The bit controls the horse's movements but can cause pain. Bitless bridles are commercially available, and many horse owners make their own bitless bridles to save money.
Things You'll Need:
- Leather straps with buckles
- Steel ring
- Heavy thread
- Buckle an 18-inch strap to form a loop. This strap will encircle the horse's muzzle, and the holes allow you to adjust the size of the loop according to the size of the horse.
- Stitch a steel ring to the strap with heavy thread so that it is approximately 3 inches from the buckle. This ring will hang below the horse's chin.
- Place a 34-inch strap through the steel ring and around the horse's head behind the ears. Buckle the strap for a good fit, and adjust the position of the buckle so that it lies against the horse's cheek about 8 inches from the steel ring.
- Stitch the two straps together with heavy thread so that the 34-inch strap is attached to the 18-inch strap just behind the steel ring.
- Place a 24-inch strap over the horse's brow midway between the ears and eyes. It should cross the 34-inch strap at a right angle below the eyes. Stitch the 24-inch strap to the 34-inch strap.
- Attach a set of reins to the steel ring, with one rein on each side of the horse's head. You can also clip a lead rope to this ring.