Previous Article

How to Make a Bitless Bridle

Next Article

How to Use a Bitless Bridle

How to Ride With a Bitless Bridle

A bitless bridle is a style of horse bridle that uses pressure points on the head of the horse to control its movements. By pulling on the reins, pressure is applied to the head or nose in order to guide the horse. Bitless bridles are said to be gentler on the horse than a standard bridle.


  1. Attach the bitless bridle you are using according to the style that you have chosen. Most bitless bridles have a chin strap and nose ring that slips over the horse's mouth and head as well as a nose band that applies pressure to the nose for better control.

  2. Tighten all buckles so that they are tight enough for the horse to easily feel the movement of the reins, yet loose enough to be comfortable for the horse.

  3. Mount the horse and ensure that the reins are attached to the bitless bridle that you are using.

  4. Pull on the rein with the right hand in order to apply pressure to the right side of the horse's head. This will make the horse turn to the right

  5. Pull on the rein with the left hand in order to apply to the left side of the horses head. This will make the horse turn to the left.

  6. Pull on both of the reins at the same time to prompt the horse to stop.

  7. Experiment with the amount of pressure needed to achieve the movement that you desire from the horse. Start out with slight pressure and gradually increase the amount of pressure you use to determine the amount of pressure needed for accuracy in movement.

  8. Do not balance yourself with the reins while riding using a bitless bridle. This will cause constant pressure on the horse's pressure points can cause discomfort.