Previous Article

How to Design Political Yard Signs

Next Article

How to Make Custom Road Signs

How to Make an LED Sign Board

There are many different methods and materials available to make homemade LED sign boards. The number, size and color of the LEDs will determine the amount of current necessary to power the lights. Save money by creating your own signboard that displays any message of your choosing.

Items Needed:



  • LEDs

  • Matrix board or circuit board

  • 10 Volt AC/DC adapter

  • Resistor

  • Wire

  • Soldering iron

  • Solder



  1. Locate and purchase the supplies that help to make the sign board looks the most professional. While cardboard or poster board is an acceptable material to use as the template, it does not last as long or produce consistent results that circuit or matrix boards produce. Look in hobby shops, electronic parts specialty stores or online electronics surplus stores like alltronics.com.

  2. Draft a design to aid you in LED light color placement. This sketch does not have to be to scale as it is used as a basic guide.

  3. Calculate the power necessary to light all of the LEDs based on the current limiting resistor value for each array using the free calculator at led.linear.1.org. Refer to the packaging from your LEDs to determine the diode forward voltage and the diode forward current. This application is simple to use and even displays a helpful wiring diagram.

  4. Place the LEDs into the matrix board according to the wiring diagram.

  5. Solder the LEDs in the series or combination series/parallel sequence. Keep the positive leads together and the negative leads together ensuring that the positive and negative do not touch.

  6. Solder the adapter switch to the end negative wire and solder the transistor to the end positive of the LEDs. Solder the positive from the transformer to the resistor and solder the transformer negative to the switch.