Steps to Screen Printing on a Banner
Screen printing is can be done on many different types of materials such as; fabric, glass, paper and metals. Although a little more time consuming you can easily so screen printing on a banner. The process is very easy once you know all the steps and have the tools necessary to print.
The Process of Screen Printing a Banner
You must first gather up all the supplies and equipment you will need for your printing job.
- Transparency Film
- Screen
- Emulsion and Sensitizers
- Scoop Coater or Squeegee
- Rubber Gloves
- Rubber Spatula
- Photo-safe Light
- Black Bristol Board
- A Sheet of Glass
- 250 Watt Photo Floodlight and Fixture
- Timer
- Spray Bottle
- Shower head or Garden Hose With Sprayer
- 2 Double Hinged Clamps
- Acetate - Large Sheet
- Packing Tape
- Work Table
Screen printing a banner will have to be done in sections so it easier to handle. If you are using your printer to print your design, purchase banner paper to make it easier to cut the design in sections. Once you have your finished design on paper, simply cut the paper into manageable sizes.
1. Once you have your design sections you will need to burn it onto the stencils. This is done using a 250-watt photo floodlight and emulsion liquid.
2. Leave your stencils to cure in the dark room.
3. Once your screens are dry it will have to be rinsed well with a shower head or garden hose.
4. Place the first screen in the desired area on your banner material.
5. Secure the screen to a work table and work the dye over the screen with a squeegee.
6. Let the ink dry for 1 hour.
7. When the ink has dried, iron over the print with a very hot iron for one minute. This will make the print colorfast and it will prevent it from washing away.
8. Move on to the next section of your banner and repeat steps 4-7 until all your section are printed.