Previous Article

Steps to Screen Printing on a Banner

Next Article

Steps to Smart Retirement Investing

Steps to Setup a Home Broadband Network

If you have more than one computer in your home, you may want to setup a broadband network. Broadband networks allow all computers in the home to share a broadband connection. This enables each user to gain access to the Internet whenever they wish.

Setting up a Home Broadband Network



1. Check your computers to see if they are wireless ready. Wireless ready computers contain a wireless card. If your computer does not have a wireless card you will need to purchase a wireless card or wireless USB adapter for each computer.




  • Got to the "Control Panel" and choose the "Device Manager." If your computer has a wireless card you will see it listed under devices.


  • A wireless card will need to be installed in your computer. You will have to open the side panel and insert the wireless card into one of the expansion panels on the motherboard.


  • A USB wireless adapter is very easy to use. You simply plug the wireless USB adapter into any available USB port and you're done.




2. You will also need to purchase a wireless router to route the Internet signal to each computer.



3. Chose the computer closest to the cable or DSL modem and install the CD that came with your router.



4. Plug the router into the wall and connect an Ethernet cable from the outgoing port on your modem to the WAN port on the router.



5. Go to the computer's "Control Panel" and click on the "Network and Sharing Center" icon. Choose "Connect to a Network" then click on "Wireless Network." Your computer will then locate the router. When you see the name of the router appear, click "OK" to connect.



6. Repeat step 5 for all other computers in the home and you're all set to surf the Internet.