How to Mount Drapery Hardware
You do not need to be a do-it-yourself pro to install and mount your drapery hardware. Mounting the hardware that your drapery is hung on is a quick and easy process that you can complete yourself in no time at all. As long as you have a couple of basic tools, and the physical ability to stand on a step stool or ladder you can easily compete this job yourself.
- Put your curtains onto your curtain rods so that you can get a feel for the size of the rod, and how far you need to extend your curtain rod for the best visual effect.
- Hold the curtain rod to the window so that you can decide where you want the placement to be on your window so that the curtains are at the optimal length for your window. Floor length drapes should not touch the floor; they should sit just above the surface of the floor to avoid damage to the fabric.
- Use a pencil and mark the spot in which the top of the bracket is sitting when your curtains are in the optimal position.
- Measure the distance from the floor to the top of your pencil mark and record the amount in inches.
- Measure the other side of the window from the floor to the ceiling making the exact same height as you recorded from the other side that you measured.
- Be sure that you do not hang your window brackets right at the edge of the window frame. You want to bring your brackets out about two inches from the corner of the window frame for the best effect.
- Hold the bracket in place and insert a crew into the hole in the bracket with your other hand.
- Screw in the screw with a screwdriver or drill depending on your preference.
- Repeat the process with the second screw that holds the bracket in place.
- Install the bracket on the other side using the same technique that you just used to install the other side. Be sure that you do not over-tighten your screws if you are using a drill. This can sometimes cause too much pressure to be applied to the bracket and may cause it to crack.