How to Move Gym Equipment
Exercise is an important way of maintaining a healthy lifestyle. A gym membership can be expensive and many people prefer to work out in the privacy of their own homes. Making your own gym equipment is a cheap and easy way to utilize readily available materials to make equipment that is custom for your needs. When you build your own equipment you are motivated to use it.
Items Needed:
- A piece of PVC pipe
- A straight bar
- Pipe cladding
- A hack saw
- Scissors
- Tape
- Measure the PVC pipe using a measuring stick or tape. Use a hack saw to cut it to size. Make sure you do not make the pipe too short or too long because you can always cut more later. Use the length of an Olympic bar as your point of reference.
- Cut the cladding to the same size as the pipe using scissors. Place it on the bar to make sure you get the right size, and then attach it to the bar. Make sure you have enough space on each end for the weight plates.
- Wrap electrical tape over the cladding to secure it tightly around the bar. The cladding should be tight enough to restrict movement when the pipe is installed.
- Hold the clad bar upright and slide the drain pipe over it. This will require some effort to get over the tightly clad bar. Push until the drainpipe goes all the way. The bar should fit snugly into the pipe and should not move about.
- Place weights on each end of the pipe and your gym equipment. Test the bar with the weight for safety. Make weights for your home gym, which you can use to alternate your exercises.