How to Operate a Mini Excavator
A mini excavator is an earth-digging machine that is mechanically similar to a backhoe only smaller. It is often used by private individuals to dig a trench to hold a pipe or cable. A mini excavator has a separate control for each of its movable parts.
Things You'll Need:
- Mini excavator
- Dig plans
- Position the mini excavator so the most distant point you need to dig is just within reach of the boom. Push the pair of travel levers forward to move the machine forward and pull them back to move the machine backwards. Pull one of the travel levers at a time to turn the mini excavator.
- Place the stabilizers against the ground using the proper controls, if your mini excavator is so equipped. Drop the front blade until it pushes against the ground, lifting the machine slightly. This will provide additional stabilization when moving the boom rapidly.
- Move the boom away from you so that it extends halfway to the limit of its travel. Move the bucket on the boom forward until it is two-thirds extended toward the limit of its travel.
- Extend the boom forward until the bucket almost touches the ground, and curl the bucket toward you so its teeth make a 45-degree angle with the ground.
- Pull the boom toward you while curling the bucket toward you to fill the bucket with soil. Raise the boom to lift the bucket from its hole. Turn the mini excavator to the side and empty the bucket in the desired locations.
- Repeat these steps as needed to dig the trench or other type of hole.