How to Paint Autos With Lacquer Paint
Using lacquer paint on a car can give it a deep color and shine that other paints cannot match. Painting your own car with lacquer paint is not easy, so it is not for the faint of heart. With some hard work, you can restore your car to its original beauty.
Items you’ll need:
- Lacquer paint
- Paint thinner
- Mask
- Plastic covering
- Tape
- Paint sprayer
- Sandpaper
- Primer
- Rags
- Sealer
- Sand your car down to remove all paint from the vehicle. You will need a blank canvas to work on. Once you have properly sanded the car down, wipe it with a damp rag to ensure that there is no dust left on the exterior of the car.
- Tape a plastic covering to all parts of the car that will not be painted. This is especially necessary for the windows. Tape carefully, because if you don’t, you will have a disaster when a wet plastic covering falls somewhere that it shouldn’t.
- Apply primer to the vehicle using your paint sprayer. This layer will help the lacquer paint to have an even, well-coated look on the car. Make sure to use your mask while painting. Once the primer has dried, apply sealer to the exterior.
- Add paint thinner to the paint before you begin, using the ratio provided to you by the can of paint. Then, spray a layer of paint onto the vehicle. Allow the paint to dry before adding another coat; your paint can should tell you the approximate drying time the paint will need. Apply up to ten coats to the exterior of the car. Before you finish, thin out the paint even further than you have.
- Allow the paint to dry completely, leaving the car in a garage or covered area for at least 72 hours. This will allow the paint to cure completely and keep dust or debris from sticking to the exterior of the car.