How to Put in Contact Lenses
If you have contact lenses you should place them into your eyes carefully to make sure they are positioned properly. Inspect contact lenses to make sure they are clean and free from tears before using them and place contacts into eyes positioning them correctly over the center of the iris.
- Wash your hands with soap and water. This is important so you do not get any dirt or debris on contact lenses or in your eyes.
- Open the container holding your contact lenses and place one of the contacts on the index finger of your right hand. If you are left handed then use your left hand to do this.
- Inspect the contact to make sure that it is in good condition without any tears, rips, or debris attached to it. If you see any debris use contact solution to rinse off the contact lens. Make sure that your contact is not inside out by looking at the edges of the lens. Edges should be facing up and not curled over. If you see edges that are bent or curled then your contact lens is probably inside out and should be flipped over.
- Pull open your upper and lower eyelids with the index finger and thumb of your left hand. Place the contact into your eye by moving your finger with the contact on it slowly to your eye until the contact is touching your eyeball. Move your eye so that the contact is placed in the center directly over your iris.
- Remove your fingers carefully from your eyelids and blink your eyes a few times to make sure that the contact is in place properly. Your contact lens should feel comfortable and in position at this time.
- Repeat these steps to put the remaining contact into your other eye.