How to Recondition Batteries
If the battery in your vehicle is not holding a charge, you may be able to recondition it. The most common cause of low battery performance is due to sulfur collecting on the battery, which blocks the electric current. You can save money by reconditioning the battery at home. This article will instruct you on how to recondition batteries.
How to Recondition Batteries
Test the battery with a voltmeter to see if it will respond to reconditioning. If the voltmeter reads between 10 and 12 volts, the battery can be reconditioned. If the voltmeter reads less than 10 volts, the battery should be replaced.
Heat 8 ounces of Epsom salt and a half-quart of distilled water in a pot. Heat the liquids to 150 degrees Fahrenheit.
Pull off the cell caps on the battery. If the battery is sealed, drill through the shadow plugs to reach the battery cells.
Use a funnel to remove any fluid from the battery.
Pour the Epsom salt and water solution into each battery cell.
Replace the battery cell caps. Insert plastic plugs for the battery that was sealed.
Charge the battery on a battery charger for 24 hours.