How to Refill Trimmer Line
Some homeowners cut and trim their own lawns rather than hiring someone to do the task for them, which is a great way to save money. Although trimming your lawn can be a tedious chore it can really enhance the appearance of your lawn.
- Take the spool off the trimmer by gently pulling on it and turning to the left. You may have to use a little force if it does not come off easily.
- Use an old rag to clean off any dirt and debris from the spool housing and the spool ring.
- Use a putty knife to scrape off any dirt and debris that may be caked on the unit.
- Use a damp sponge to remove any excess dirt and debris loosed by the putty knife.
- Hold the replacement line in your hand and unroll the amount that you need to put on your trimmer.
- Use a utility knife or a pair of clippers to snip the replacement line.
- Push one end of the replacement line through the hole in the spool ring.
- Use a pair of pliers to crimp the replacement line at approximately 1/2-inch in length.
- Wrap the replacement line around the spool. There should be an arrow showing you which way it should be wrapped.
- Push the end of the line through the feed hole, which is located on the side of the spool ring.
- Insert the leading line into the spool housing and back out through the hole cut into the housing.
- Put the spool back into the housing and turn it slightly to the right to lock it in place.
- Gently pull on the end of the line to tighten it.