How to Refinish Wooden Boat Oars

If you own an old set of wooden boat oars, they are likely worn and weathered from years of use. Taking the time to refinish your oars can help restore their beauty and shine and increase their performance. Refinishing the oars can also protect them from further water and sun damage.

- Gather your supplies. You will need an abrasive pad, such as steel wool, a gloss varnish product and a paint brush for application.
- Be mindful when purchasing a gloss varnish product. These products are available at most home improvement retailers or hardware stores. There are certain gloss varnish products that are produced and marketed specifically for use on boats, so take the time to shop around for an appropriate product. If you have any questions, consult with a knowledgeable retailer.
- Scratch up the surface of the oars.Rub the wooden surface using an abrasive steel pad. This will make the surface of the oar rough and more receptive to paint and finishing.
- Apply your first coat of gloss varnish. Using a paint brush and a steady, even stroke, apply the first coat of gloss varnish to your oars. Allow this coat to dry completely. This could take up to three hours. The varnish should be smooth and not at all tacky or sticky when dry. Refer to the product packaging for specific drying times for your particular varnish.
- Apply a second coat of varnish. Using the paint brush, apply a second coat of gloss varnish to your oars.

- Apply additional coats of varnish as recommended. Certain products may recommend more than two coats of application. Up to five coats may be required for untreated wooden oars. Read the instructions on your varnish for detailed directions.
- Allow varnish to dry. Allow all coats of varnish to dry thoroughly before using your oars.