Previous Article

How to Refinish Wooden Boat Oars

Next Article

Flower Arrangements for Yachts

How to Repair Fiberglass on a Wooden Boat

Wooden boats made with fiberglass are not as hard to repair. Most people believe that the finish is made with fiberglass and cannot be repaired. The surface is actually a wooden boat covered with epoxy resin that is used in many works that use fiberglass.

Materials Needed



  • Mild liquid detergent

  • Clean cloths

  • Dewaxing solvent

  • 80-grit sandpaper

  • 220-grit sandpaper

  • 320-grit sandpaper

  • Palm sander

  • Acetone

  • Paintbrush

  • Epoxy resin

  • Paint

  • Wax


 





  1. Clean the boat with water and mild liquid dish detergent. You can wash the entire boat if you desire but you only need to wash the area you want to repair and the areas around it.

  2. Use a clean cloth to apply a dewaxing solvent to the area you want to repair. Make sure you get the areas around the repair area as well.

  3. Attach 80-grit sandpaper to a palm sander and sand the area. You do not want to expose the wood underneath but you want to make sure the surface is rough.

  4. Put a small amount of acetone on a clean cloth and apply it to the repair area. This will remove the dust left behind from sanding.

  5. Mix epoxy resin according to the directions and use a paint stirrer to make sure it is mixed thoroughly. Only mix the resin in small batches.

  6. Use a paintbrush to apply the epoxy resin to the repair area. Apply two additional coats of epoxy resin. Wait one entire day for the epoxy resin area to dry.

  7. Sand the area with 220-grit sandpaper and follow that sandpaper with 320-grit sandpaper to sand the area. Make sure the edges of the epoxy resin are smooth.

  8. Paint the newly repaired area with a paintbrush. Apply wax with a soft cloth and shine the area to a shine.