How to Regrout Mosaic Tile in an Outdoor Fireplace
Adding mosaic tiles is a great way to decorate your outdoor fireplace. However, over time the grout can begin to crumble and deteriorate which can diminish the decorative effect. Fortunately, re-grouting your mosaic fireplace is a simple task that can be easily accomplished.
What You Will Need
- Utility knife
- Grout float
- Outdoor grout
- Grout sponge
- Remove the old grout from the mosaic with your utility knife.
- Mix the replacement grout according to the instructions on the package.
- Place a small amount of grout onto the tiles with your grout float.
- Hold the float at a 45-degree angle and press down as you drag the float across the tiles. To ensure the grout is being placed between each of the tiles, make several passes from differing angles.
- Wipe the surface of the tiles carefully to remove excess grout with your grout sponge.
- Slightly dampen your sponge and make one pass over the tiles to help clean excess grout.
- Allow the grout to dry for a minimum of 24 hours.
Additional Information
- When removing the older grout, take extra care not to chip the mosaic tiles with your utility knife.
- When removing the old grout, chip out a little bit at a time and change the blade as needed.
- The mixed up grout should resemble peanut butter when properly prepared.
- To avoid a haze from forming on your grout, change your rinsing water frequently.
- Grout needs a minimum of 24 hours to dry, but will have better results if left for a couple of days.