Previous Article

How to Install House Siding

Next Article

How to Repair Steel House Siding

How to Remove Mold on House Siding

Removing mold on house siding after an extended exposure to the elements helps maintain the look of the exterior of your house. Organisms such as mildew, algae, mold and moss accumulate because of the build-up of dirt, moisture and wind on the house siding over time. Acting quickly to remove this buildup helps restore the original look and condition of the siding and just requires the use of ordinary household items.

What you will need:



  • Liquid soap

  • Bucket

  • Scrubbing brush

  • Oxygen bleach

  • Towels

  • Clean soft cloths

  • Plastic spray bottle



  1. Put warm water in a bucket and squeeze a few drops of a liquid soap in the water. The presence of phosphoric acid in such soaps effectively removes mold spores that show sensitivity to such weak acids.

  2. Use a spray bottle filled with the soapy water or a clean cloth dipped in the water and apply to the surface to remove mold from vinyl siding. Leave the soapy water on the siding for 15 minutes to allow for proper disinfecting of the surface.

  3. Use a stiff long-handled scrubbing brush to scrub the siding. Purchase these brushes at camping supply stores. They effectively remove mold from siding.

  4. Remove the soap by rinsing thoroughly with water. Remove all moisture from the siding using dry towels. Make sure no water spotting remains as this moisture will encourage the re-growth of additional mold.

  5. Combine water with oxygen bleach powder to form a more potent solution if the soapy water cannot kill the mold. The oxygen bleach mixture has a strong disinfecting quality, yet will not harm vegetation or discolor surfaces the way chlorine bleach would. Follow the manufacturer’s instructions when adding water to the oxygen bleach.

  6. Use the same technique to apply the oxygen bleach mixture to the house siding as that used with the soapy water. Allow 15 minutes of drying time before scrubbing off the mixture from the surface. Use clean cloths to completely buff dry the surface.