Previous Article

How to Operate a Double Hung Window

Next Article

How to Take Apart a Double Hung Window

How to Remove a Double Hung Window

Being that the basic structure of double hung windows are generally the same, a set of directions can be followed to remove most of them. Even though double hung windows seem to complicated and too hard to move on your own, it is a lot simpler than it appears.

What you need:



  • Thin cats paw or putty knife

  • Nail

  • Pliers




  1. Slide your thin cats paw or putty knife behind one of the front stops of the window.

  2. Gently lift the front stop from the frame of the window. You will only need to remove a stop on one side of the window. Removing nails from the frame will make this step easier.

  3. Secure chains or ropes on both sides by putting a nail through them to keep them from sliding back the puller.

  4. Lift the sash up and pull it towards you.

  5. Remove the rope or chain from the sash.

  6. Crack the paint seal between the sash and frame and remove the parting bead. The parting bead may be painted in, nailed or just have a very tight fit. Use wrapped pliers or a putty knife to make this step easier.

  7. Slowly pull the parting bead out past the sash and then set it out of your way.

  8. Slide the upper sash down past the pulleys and put a nail through the chains or sash again.

  9. Pull the sash down and remove nails from chains and ropes.

  10. Pry open the secret doors in both sides of the window frame.