Previous Article

How to Remove the Cadillac STS Radio

Next Article

Cadillac STS Information

How to Remove a Radiator From a Cadillac STS

Cadillac STS

You have just found out that you need to have your radiator removed from your beautiful Cadillac STS. The reason could be one of many: the pothole that you hit on the way to work or the time your nephew tried to practice for an upcoming exam in his mechanics class. Having a professional remove it could cost you a lot of money. Here's an option: you do it.

removing radiator

Things You'll Need:

  • J 38185 Hose Clamp pliers
  • J 44827 Transmission Coolant Quick Disconnect
  • car jack
  • coolant (if replacing radiator)
  1. Make sure you have all of the tools that you are going to need. 
  2. Empty the coolant. 
  3. Detach the radiator support brackets.
  4. Detach the cooling fans.
  5. Detach the two overhead condenser mounting bolts.
  6. Elevate the car. Note: The transmission oil cooler lines uses an immediate connect fitting at the radiator. The quick connect fitting must be detached utilizing a specific tool (J 44827 Transmission Coolant Quick Disconnect). Detaching the transmission cooler lines without this tool could significantly damage the radiator and the transmission cooler. The transmission could also be damaged due to the mixing of the transmission oil and the coolant.
  7. Detach the lower transaxle oil cooler line from the radiator using the J 44827.
  8. Detach the lower radiator hose from the radiator using the J 18385.
  9. Detach the lower condenser mounting bolts.
  10. Detach the radiator side seal push pins.
  11. Disconnect the side seals from the radiator.
  12. Lower the car.
  13. Detach the radiator.
    replacing the radiator

To replace the radiator:

  1. Set up (install) the radiator into the insulator of the frame.
  2. Set up the upper condenser mounting bolts. Screw the bolts to 6.5 Nm ( 58 in. lbs.) Elevate the car.
  3. Drive the lower transaxle oil cooler lines into the radiator until you hear them connect.
  4. Pull on the transmission oil cooler lines gradually to verify that the lines are secure.
  5. Attach the lower radar hose to the radiator.
  6. Take the J 38185 and slide the clamp into the original postion on the hose.
  7. Attach the auxiliary transmission oil cooler line into the radiator.
  8. Position and install the side seal push pin into the radiator.
  9. Make sure that the seals are in place around the radiator.
  10. Lower the car down.
  11. Attach the cooling fans.
  12. Attach the radiator supports.
  13. Replenish the system with coolant.