Previous Article

How to Open a 1989 Cadillac Eldorado Gas Tank

Next Article

How to Remove a Radiator From a Cadillac STS

How to Remove the Cadillac STS Radio

Overtime the factory installed stereo unit in your Cadillac STS will begin to diminish in performance and advanced features. With the advancements in technology there are many new features available from Bluetooth to in-dash navigation systems. If you wish to upgrade the unit in your vehicle, you can do so by completing a few easy to follow steps.

What You'll Need:



  • 1/4-inch ratchet and socket set



  1. Carefully position the tips of your fingers in between the gap that is located between the area of black trim around the stereo and the dashboard near the dash vents. Begin pulling the panel out until it has been removed. Complete this step carefully and gently to avoid any unnecessary damage. Applying too much pressure or using too much force while completing this step can cause the trim to crack.

  2. Once the unit has been removed, unplug any wires connected on the back of the unit using your hands.

  3. Using a 1/4-inch ratchet and socket, completely unbolt both the stereo unit and the panel for climate control form the dashboard of the Cadillac STS. Begin pulling the panel toward you, then reach around to the back of the stereo unit to unplug any wires that are connected to the unit that houses the stereo known as the assembly.

  4. Once again using the 1/4-inch ratchet and socket set, completely unbolt the factory installed stereo from the climate control assembly unit. Once each bolt has been removed, you'll need to pull the stereo apart from the climate controls to completely remove it from the Cadillac STS.