How to Remove an Oil Filter Adapter
An adapter for your oil filter is designed to store aftermarket components for your vehicle's oil system, such as a gauge for your oil temperature and pressure. There are a number of reasons why you would want to remove an oil filter adapter, but the most common reason is for replacement. Often times, you will need to remove the oil filter adapter to gain access to the oil filter in order to replace it.
- Lift the front end of your vehicle. You will need to use a jack to raise the front end of your car off the ground and two jack stands stands to keep it raised up. There are several ways that you can raise the front end of your vehicle off the ground, but you want to make sure that it is securely raised before you do anything to ensure that you are not injured in the process of removing the oil filter adapter.
- Empty the motor oil from the vehicle. There are several ways that you can drain motor oil from your car. To ensure that the flow of oil is consistent and reduce time, you may want to open the hood of your car and remove the oil filler cap that is located on the engine. By doing this, you will allow air to flow in as the crank case drains which will guarantee that the oil is removed quickly and without any problems.
- Remove the oil filter by using a special filter wrench.
- Use a crescent wrench to remove the oil filter adapter. You will need to place the jaws of the wrench at the bottom of the adapter and turn it clockwise in order to loosen it.