How to Remove the Glove Box in a 2008 Subaru STI
Although the glove box of a 2008 Subaru STI may appear to be difficult to remove from the vehicle due to its unique shape, it is in fact an easy task to remove so long as you have the proper tools.
What You'll Need:
- Phillips head screwdriver
- Open the glove box of the vehicle.
- Find the location of the glove box damper. This is the cylinder that is found on the right side of the glove box.
- Remove any screws that secure the damper into the glove box with your Phillips screwdriver.
- Pull the damper out from the glove box.
- Squeeze the sides of the vehicle’s glove box until the stoppers located on the back of the glove box are away from the dashboard.
- Pull the glove box away from the dashboard.
- Place the hooks on the bottom of the glove box onto the pins that are located on the bottom of the dashboard.
- Squeeze the glove box’s sides and pivot it into the dashboard until the glove box’s stoppers are placed behind the Subaru’s dashboard.
- Fully release the sides of the glove box.
- Place the damper onto the side of the dashboard.
- Screw the glove box damper into place with your Phillips screwdriver and ensure the screws are securely tightened.
- Close the glove box.
Additional Information
- If you are removing the glove box to access any electrical components located behind the glove box, disconnect the battery cable before starting any work on the vehicle.