Previous Article

How to Repair a Torn Plastic Barbecue Cover

Next Article

How to Roast a Whole Chicken With a Rotisserie Gas Grill

How to Repair Electric Grill Igniters

If a grill's electric igniter control fails to work, then you have to figure out what is the problem which can be anything. The majority of problems come from corroded cables and fading electrodes. Fixing the electric igniter is a moderately easy project that should only take minutes to complete.

Things You'll Need:



  • Wrench

  • Pliers

  • Wire brush

  • Electrical tape

  • Batteries




  1. Detach the gas tank from the grill. Wear gloves and take off the hood of the grill. Take away the grates. Undo the gas jets with a wrench and pliers. Place the interior parts away on newspaper.




  2. Find the ignition control on the grill and disconnect the cables from going to the control. Undo the igniter by releasing the holding ring and/or holding screw. Take the part out of the grill.




  3. Take the old igniter part to a home improvement or grill supply store and buy a substitute igniter.




  4. Connect the substitute igniter and lock it down to the grill with the holding ring and/or holding screw. Connect the electrical cables back into the ignition control.




  5. Wash the burners and grates completely with a wire brush. Reconnect each section in the grill. Attach the gas tank up and switch it on. Reduce the igniter to tryout.





Fixing the Electric Ignition on a Gas Grill




  1. Push the ignition control on the gas grill to turn on the electric ignition. Watch the ignition to find out as a result it sparks.




  2. Regulate the spark unit so that the conductors are facing the appropriate location. Rotate the unit to face the conductors in the direction of the burner so that the spark will more easily ignite the propane gas while lighting.




  3. Find the battery board for the electric ignition. Take away the shell from the board and detach the old batteries. Substitute the batteries with new AA, AAA or C batteries based the producer and the kind of grill you own. Lock the battery shell in position.




  4. Follow the cables from the battery section to the ignition unit. Observe indications of damage and deterioration that could harm the ignition. Restore the cables by covering them with electrical tape.




  5. Inspect the connection outlet on the ignition unit where the cables from the battery attach. Fasten the movable connections by means of a set of pliers or screwdriver as required. Sweep deterioration or waste that could affect the ignition; use a stiff-bristle brush.