How to Repair a Frigidaire Dryer Fuse
Frigidaire is a well-known household appliance brand. The brand is known for dependable washers, dryers and refrigerators. Certain maintenance is required on all household appliances to assure performance satisfaction. A Frigidaire dryer fuse may be repaired by following this procedure.
Items Needed:
- Butter knife
- Plastic bowl
- Pliers
- Replacement fuse
- Screwdriver
- Always empty the lint filter to promote longevity for the dryer and the fuse.
- Examine the dryer fuse to see if it has tripped. This is a safety feature built into the dryer to prevent fires.
- Read the dryer manual to determine the type of replacement fuse to purchase.
- Replace the Frigidaire dryer fuse if the dryer will no longer heat, as it is impossible to repair the fuse itself.
- Determine if the power company has disconnected power from the house temporarily or if downed power lines may be the culprit.
- Check the circuit breaker to see if it has been tripped or if the breaker needs replacing.
- Disconnect the dryer from the source of electricity.
- Release the springs under the top of the Frigidaire dryer by pushing the butter knife under the front of the dryer on each side.
- Open the cabinet top of the dryer and push it to the side or up, depending on the model.
- Utilize a screwdriver to turn the screws on the front panel.
- Place the screws in a plastic bowl for safekeeping.
- Find the fuse by searching near the back of the dryer above the drum.
- Examine the fuse to see if it is open, as this is a sign of a faulty fuse that needs replacing.
- Disconnect the faulty fuse utilizing pliers and discard it properly. A slight pull should allow the fuse to slip from the grasp of the connectors.
- Attach the new fuse to the connectors.
- Re-attach the screws on the front panel to hold it securely in position.
- Push the cabinet top back over the top of the dryer and snap it into place.
- Plug the dryer back into the electric supply.
- Test run a load of clothes.