Previous Article

How to Repair a Concrete Porch

Next Article

How to Repair a Sinking Brick Patio Set in Sand

How to Repair a Patio Swing

Patio swings are a great way to relax after a long hard day. Over time the swing can start to get, rusted and can develop multiple hardware problems including bad chains and wood deterioration. Swing repairs are usually easy enough that you can do the repairs yourself, and get your swing back in good working condition.

Things you'll need:



  • Wood stain

  • Lumber

  • Sandpaper

  • Chain

  • Nails

  • WD-40



  • Fix any suspension problems from the swing. The swing’s wood beam can end up pulling out that supports the swing. This problem can occur because the constant movement of the swing has widened the hole that holds the suspension hardware. Overtime it works its way free. To fix this problem remove the suspension hardware, that looks like a large hook and has a screw end. Suspend the swing and wrap the swing’s chain around the wood beam and then connect it to the hook. This provides extra support for the swing and helps to prevent the chain from loosing up again.

  • Replace all broken and rusted chains on the swing. Unhook the chain from both the swing and the suspension system. Replace the old chains for new chains, and make sure they have been cut to the right length.

  • Stop your patio swing from squeaking by oiling it. After some time of the swing being outside, metal parts begin to rust, and eventually begin to start squeaking. To fix this problem sand down the areas that are rusted on your swing, use metal cleaner to clean the area, and then lubricate the area with oil, such as WD-40.

  • Repair the old finish on your swing. Your swing is always exposed to the weather, no mater if it is rain, snow, ice, sunlight or the wind, and it affects the swings finish. Strip the old finish by sanding it down, and then apply a new finish with paint or stain for your patio swing.