How to Repair a Tent Trailer Lift
A tent trailer lift will need to receive maintenance and repairs if you are heavily using the system. There are a variety of designs that the tent lifts come in, but the main issues are corrected in similar ways. Missing bolts and broken cables are a common issue with tent trailer lifts.
Research the diagram of your trailer by referencing the manual. Parts that need to be replaced can be located according to the lift diagram.
Supplies needed:
- Floor jack
- Support poles
- Voltage meter
- Determine which type of lift system you have. Older systems use a winch system and the newer lifts use a hydraulic system. This should be the first thing you discover, before attempting to repair your system issues.
- Use the floor jack to life the tent in an elevated position. The support poles should be set under each of the tent. Turn the lever to check for any damages to the cables or chain links; winding the lever gives you access to the cable lift system. Any breaks in the cables or chain linkage should be replaced.
- Review you manual to locate the crank and sprocket assembly. Check these items for any damages; the cranking system is how the lift system has the ability to function. Replace any damages in this area.
- Check the lower crank system (if there is one present) for damaged bearings or damages to the crankshaft or pulleys. Replace any damages in this area.
- Check the hydraulic pump wiring for any loose connections. A voltage meter can be used to check the life of the battery. Charge the battery or replace it if it is not fully working. Replace any hydraulic wiring or the pump if it is damaged.