How to Replace Mobile Home Doors
If you have lived in a mobile home for a few years, then you might need to replace the doors. Try to replace the front and back doors since they are used the most and can be seen by the public. Outside doors can get damaged without difficulty. With a few supplies you can get started on replacing your old door and soon welcoming your guests in style.
Things You'll Need:
- New Door
- Drill Bits
- Putty Tape
- Screws
- Drill
Evaluate the stature and size of the door. The majority of mobile home doors are already preset sizes and finding one should not be difficult for homeowners. Travel to a mobile home merchant to purchase a new door to be certain it matches the mobile home measurements.
Notice where the door hinges are positioned. You should know if it is on the left or right side of the door before purchasing. Decide if you want a new lock or a door with a window, but see if your old door already has been drilled for a deadbolt lock. Buy drill bits to make holes in it if it does not already have them. Purchase all the materials listed above to replace the door. You have to go to a mobile home merchant to buy putty tape because home improvement stores do not carry it.
Take off the screws from your old door. Then take the door out of the frame. Scratch away any old putty off the frame. Put putty tape all around the new door flanges. Strip off the paper backing. Hold the door leveled and install it in the frame.
Put in the rest of the screws when you are certain the door has been properly installed in the frame. Employ the correct quantity of pressure when drilling the screws in because it might break the aluminum siding. Connect a deadbolt lock on the door for safety, if you desire.