Previous Article

How to Replace Mobile Home Doors

Next Article

How to Install Home Replacement Windows

How to Refinish Interior Home Doors With Formica

Formica is a creative way to refinish any interior home door. It comes in a variety of colors and patterns and can be applied to most any surface. Formica is also easy to clean and can withstand the test of time. Refinishing your door with Formica is an affordable way to enhance the appearance of any interior door.

Things You'll Need



  • Tape measure

  • Masking tape

  • Carbide sandpaper

  • Circular saw with rip fence

  • Metal file

  • Contact adhesive

  • J roller

  • Laminate trimmer/router



  1. Remove the door from its hinges and lay on a flat even surface.

  2. Measure the door's height and width.

  3. Add one inch to the height and width of the door for your measurements.

  4. Use the measurements you just took, and use your measuring tape to mark the height and width you will need on the Formica. Make clean clear marks for easy viewing.

  5. Draw straight lines to follow and mark exactly where you will be cutting the Formica.

  6. Run your masking tape along your cutting lines making sure it forms a straight line. The masking tape will prevent the Formica from chipping when you cut it with a saw.

  7. Attach a carbide blade and your rip fence to your circular saw.

  8. Turn your saw on and carefully cut along the masking tape. Remember your Formica will be one inch larger than your door when finished cutting.

  9. Spread a moderate amount of contact adhesive to the back of the Formica. 

  10. Run some adhesive along the top of the door.

  11. Center the Formica on the door.

  12. Press the Formica firmly against the door.

  13. Use a J roller and smooth the laminate out on the door.

  14. Trim the one inch over hang of Formica off with a laminate trimmer on all four sides of the door.

  15. Even off any rough edges of laminate with carbide sandpaper. Start at the top and move your way downward and around the corners.