How to Replace Roof Vent Pipe Flanges
A vent pipe allows water vapor to escape from your house. The vent pipe flange keeps rain from entering the house and is part of the roof flashing. Homeowners typically need to replace the vent pipe flange when the roof begins to leak.
Things You'll Need:
- Ladder
- Shingle ripper
- Pry bar
- Galvanized roofing nails
- Hammer
- Roofing tar
- Place a ladder against the house and climb it to access the vent pipe. Pry the roofing nails from the shingles with a shingle ripper and pull the shingles from the pipe. Remove any damaged shingles from the roof so that you can install new shingles in their place.
- Remove the nails securing the flange to the vent pipe with a pry bar and remove the flange. Discard the damaged shingles and old vent pipe flange.
- Place the new vent pipe flange into position on top of the vent pipe. Fasten the flange to the roof with galvanized roofing nails and a hammer. The nails must be galvanized to ensure they don't rust.
- Apply roofing tar to the underside of the new shingles and install them around the vent pipe. Secure the shingles in place with galvanized roofing nails and a hammer.
- Fasten the edge of the new shingles to the new vent pipe flange with a bead of roofing tar. Seal the gap between the vent pipe and its flange with roofing tar.
- Remove the excess items from the roof and climb down from the roof.